Attaching The Side Guide Timing Belt In The Multifeeder Assembly - Canon NP6260 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
5) Remove the two mounting screws
, and remove the guide plate
6) Remove the two mounting screws
, and remove the sensor mount
.
7) Detach the sensor from the sensor
mount.
7. Attaching the Side Guide Timing
Belt in the Multifeeder Assembly
Force the rack plate of the multi-
feeder against section A (open state).
Move the slide volume in the direc-
tion of B, and attach the timing belt to
the pulley.
5-66
COPYRIGHT © 1997 CANON INC.
.
Timing belt
Pulley
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 5-812
Figure 5-813
Pulley
Rack plate
B
Side volume
Figure 5-814
Section A