Removing The Scanner Drive Cable - Canon NP6260 Service Manual

4. Removing the Scanner Drive
Cable
1) Remove the upper right cover, left
cover, rear cover, and rear upper
cover.
2) Remove the copyboard glass.
3) Remove the control panel.
4) Remove the RDF rear right mount.
(See p. 3-24.)
5) Remove the two mounting screws
, and remove the scanner locking
disc .
6) Disconnect the three connectors of
the potential control PCB, and
disconnect the connector of the
service switch.
7) Remove the five mounting screws
, and disconnect the connector
; then, remove the scanner
cooling fan .
8) Remove the two cable fixing screws
(rear) from the No. 1 mirror
mount.
COPYRIGHT © 1997 CANON INC. CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
Figure 3-506
Figure 3-507
Figure 3-508
3-27