Adjusting The Pressure Of The Separation Roller Of The Holding Tray; Positioning The Holding Tray Paper Deflecting Plate Drive Solenoid - Canon NP6260 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
13. Adjusting the Pressure of the
Separation Roller of the Holding
tray
Turn the separation roller adjusting roll
so that the distance to the shaft is 32.7
±0.1 mm.
14. Positioning the Holding Tray
Paper Deflecting Plate Drive
Solenoid
Install the solenoid so that its stroke
(distance between rubber silencer and
solenoid edge) is 5.0 ±0.3 mm.
5-104
COPYRIGHT © 1997 CANON INC.
32.7±0.1mm
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 5-892
Figure 5-893