Removing The Fixing Heat; Exhaust Fan; Removing The Developing Fan - Canon NP6260 Service Manual

3. Removing the

Exhaust Fan

1) Remove the rear cover.
2) Remove the three mounting screws
, and disconnect the connector
then, remove the fixing heat exhaust
fan .

4. Removing the Developing Fan

1) Remove the rear cover.
2) Disconnect the connector (J301)
of the high-voltage transferor PCB;
then, remove the three mounting
screws , and shift the high-voltage
transformer assembly
COPYRIGHT © 1997 CANON INC.
Fixing Heat
;
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
Figure 7-433
Figure 7-434
7-29