Canon NP6260 Service Manual page 257

6) Remove the mounting screw
the front, and free the oil damper
plate .
7) Remove the two hooks
remove the gear cover
8) Remove the E-ring
then, while sliding out the gear and
the pulley cover toward the front,
detach the end of the cable
the pulley.
COPYRIGHT © 1997 CANON INC.
at
; then,
.
at the front;
from
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Figure 5-823
Figure 5-824
Figure 5-825
5-71