CHAPTER 4 IMAGE FORMATION SYSTEM
6. Cleaning the Primary Charging
Assembly Anti-Stray Sheet
1) Open the front door.
2) Remove the developing assembly.
3) Remove the hopper assembly.
4) Remove the process unit. (See p. 7-
18.)
5) Remove the two screws
remove the blanking exposure rail
stay
.
6) Clean the primary charging assem-
bly anti-stray sheet
4-56
COPYRIGHT © 1997 CANON INC.
, and
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 4-333
Figure 4-334