Routing The Timing Belt Of The Side Guide (Multifeeder Assembly); Adjusting The Position Of The Solenoid (Delivery Paper Deflecting Plate Solenoid) - Canon NP6260 Service Manual

CHAPTER 11 TROUBLESHOOTING

11. Routing the Timing Belt of the Side Guide (multifeeder assembly)

Butt the rack plate of the multifeeder against section A (open condition).
Move the slide volume in the direction of B, and attach the timing belt on the pulley.
12. Adjusting the Position of the Solenoid (delivery paper deflecting plate sole-
noid)
Fix the delivery paper deflecting plate solenoid temporarily in place with a mounting
screw; then, move down the lever
ing plate drive solenoid
.
11-32
COPYRIGHT © 1997 CANON INC.
Timing belt
Rack plate
Pulley
B
Slide volume
Figure 11-235
in the direction of arrow A, push the delivery deflect-
B in the direction of arrow B, and tighten the mounting screw
A
q
e
Figure 11-236
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Pulley
Section A
B
w