Removing The Internal Delivery Assembly Roller - Canon NP6260 Service Manual

CHAPTER 6 FIXING SYSTEM
7. Removing the Internal Delivery
Assembly Roller
1) Open the front door, and slide the
fixing/feeding unit to the front and
out of the copier.
2) Remove the fixing/feeding assembly
front cover.
3) Remove the fixing assembly upper
unit. (See p. 6-22.)
4) Remove the fixing assembly lower
separation claw assembly. (See p.
6-31.)
5) Remove the E-ring
parallel pin at the front.
6) Remove the E-ring
bushing .
7) Remove the E-ring
at the rear.
8) Remove the E-ring
bushing .
9) Remove the fixing assembly outlet
paper sensor assembly. (See p. 6-
39.)
10) Remove the internal delivery roller.
6-36
COPYRIGHT © 1997 CANON INC.
, gear , and
and the
and the gear
and the
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 6-239
Figure 6-240