Detection Of Paper For The Deck; Detecting The Presence/Absence Of Paper; Changing The Paper Size For The Deck - Canon NP6260 Service Manual

C. Detection of Paper for the Deck

1. Detecting the Presence/Absence of Paper

The presence/absence of paper inside the deck is checked by the deck paper OUT
sensor (Q108). When the deck runs out of paper, and the paper detecting lever of the
pick-up roller assembly leaves the deck paper OUT sensor, the copier's control panel
indicates the Add Paper message.

2. Changing the Paper Size for the Deck

To change the paper size for the deck at time of machine installation or to comply
with the user's request, shift the guide plate inside the deck to suit the copy paper, and
enter the paper size in service mode (*5*; 'SDK_SZ').
COPYRIGHT © 1997 CANON INC.
Paper detecting
lever
Figure 8-105a (paper present)
Paper detecting
lever
Figure 8-105b (paper absent)
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK-A1
Deck paper OUT sensor
Copy paper
Lifter
Deck paper OUT sensor
Lifter
8-7