Unpacking And Removing The Fixing Materials - Canon GP335 Service Manual

CHAPTER 12 INSTALLATION
A. Unpacking and Removing the Fixing Materials
Here, the machine is a model equipped with a DADF as standard.
No.
1 Unpack the machine, and remove
the plastic sheets.
If you are installing a cassette
pedestal, unpack the pedestal also.
2 Holding the grips of the machine
(working in a group of two), place
it on the cassette pedestal.
3 Open the cardboard box that comes
with the machine, and take out the
parts and attachments.
4 Mount the lower left cover (rear).
• Mount the hook at the bottom;
then, push in the snap at the top.
12-4
Work
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
• If you are installing the machine on a cassette
pedestal, keep in mind that the vertical path assembly
of the pedestal is designed for installation after
installation of the machine.
• Remove all tape from the covers and from inside the
cassette.
Grips
Check to make sure that none of the following is missing:
Inside the Cardboard Box
• Copy tray
• Grounding cord
• Drum unit
• Screw for lower right cover
• Lower right cover (rear)
• Toner
• User's Manual (copying)
Taped On the DADF Top
• Stepped screw
• Stamp
Claw
Hook
Remarks
• Installation Procedure
• Lower left cover (rear)
• DADF delivery tray unit
• Lower left cover (front)
Lower left cover (rear)
Grips