Removing The Dc Controller Pcb; Removing The Fixing Power Supply Pcb - Canon imageCLASS LBP325dn Service Manual

Removing the DC Controller PCB

■ Preparation
1. "Removing the Rear Cover Unit" on page 127
2. Remove the cassette.
3. "Removing the Cartridge" on page 127
4. "Removing the Right Cover Unit" on page 129
5. "Removing the Left Cover" on page 133
6. "Removing the Controller Cover" on page 140
7. "Removing the Control Panel Unit" on page 150
8. "Removing the Upper Cover Unit" on page 136
9. "Removing the Controller Box" on page 144
■ Procedure
1. Remove the DC Controller PCB.
21x
NOTE:
The completed assembly of the DC Controller PCB is shown below.

Removing the Fixing Power Supply PCB

■ Preparation
1. "Removing the Rear Cover Unit" on page 127
5. Parts Replacement and Cleaning
3x
146