The following table describes the IP Routing General Configuration controls:
IP Routing General Configuration controls
IP Forwarding Enabled?
Enable Forwarding Directed Broadcasts?
IP Destination Re-ARP Interval (2-120 minutes)
QoS Priority CoS Configuration
To display the following form, select QoS > 802.1p > Priority - CoS.
This form summarizes the QoS Priority – Class of Service parameters. Select a priority value to view the
CoSQ For Priority form.
Enables or disables IP Forwarding.
Enables or disables forwarding directed broadcasts.
Sets the re-ARP period in minutes. The switch periodically
sends ARP (Address Resolution Protocol) requests to
refresh its address database. This command is used for
setting the interval between ARP refreshes of the next IP
address in the database. The default interval is 10
Configures the router ID.
Configuring the switch