OSPF General Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > General.
The following table describes the OSPF General Configuration controls:
OSPF General Configuration controls
Table 149
Control
Globally Enable OSPF?
External LSDB Limit (0-2000)
Default Route Metric (1-16777215, 0=none)
Default Route Metric Type
Descriptions
Enables or disables OSPF.
Sets the link state database limit. Enter zero (0) to indicate that
there is no limit.
Sets one default route among multiple choices in an area.
Sets the default-route metric type. Enter none to indicate that
there is no default.
Configuring the switch
212