Configuring The Switch's Ip Settings - Intel 470F - NetStructure Switch User Manual

C H A P T E
NOTE
If you change the flow control or
IP settings, you must reboot the
switch before the new settings
can take effect.
470T Ch4.p65
R 4 Using the Web Device Manager

Configuring the Switch's IP Settings

Note: You must select Manual in the IP Assignment Method box before you
can change the IP settings.
1 Click the Configure Device menu and then click IP Settings. The IP
Settings screen appears on the right side of the Web Device Manager
window.
2 To manually configure the IP settings, select Manual in the IP
Assignment Method box. Under "Change," type the new IP address,
subnet mask, and default gateway. If you set up tag-based VLANs on
the switch, you can specify the VLAN where the switch's SNMP
management agent will reside.
3 To apply the changes, click Submit.
4 Click Save and Reboot for the new settings to take effect. Rebooting the
switch temporarily interrupts network connectivity to the switch. Click
Reboot Later if you want to reboot the switch later. The new IP settings
will not take effect until the switch reboots.
29 3/31/00, 9:16 AM
29