List Of Factory Defaults - Intel 470F - NetStructure Switch User Manual

User guide
Hide thumbs Also See for 470F - NetStructure Switch:
Table of Contents

Advertisement

A
P
P
E
N
D

List of Factory Defaults

• Software upgrade mode: Network
• TFTP Server Address: 0.0.0.0
• Load configuration file: Disabled
• Console baud rate: 9600
• Console port data bits: 8
• Console port stop bit: 1
• IGMP Snooping: Disabled
• System port partition state: Enabled
• Lock Address Table: Disabled
• MAC Address Aging (sec): 300
• System HOL-blocking state: Enabled
• System console timeout : 15 minute
• System IGMP timeout: 300 sec
• System IP address: 192.0.2.1
• System Subnet mask: 255.255.255.0
• System Default gateway: 0.0.0.0
• System Bootp request: Enabled
• Port Nway state: Enabled (Auto-Negotiate)
• Port flow control state: Auto-Negotiate
• Port back pressure state: Auto-Negotiate
• Port priority state: Use Frame Tag
• Port HOL state: Enabled
• Ping IP address: 0.0.0.0
• Ping repeat time: 1 time
• Ping time out: 5 sec
• Port Mirroring state: Disabled
• Port Mirroring source port: 1
• Port Mirroring destination port: 2
470T Appendix A.p65
I
X
Technical Information
109
• System Spanning tree state: Disabled
• System Bridge Max age: 20 sec
• System Bridge Hello time: 2 sec
• System Bridge Forward delay: 15 sec
• System Bridge Priority: 32768
• System aging time: 300 sec
• Per Port spanning tree path cost: 10
• Per Port spanning tree priority: 128
• Per port state: Enabled
• Per Port spanning tree state: Enabled
• Read community string: "public"
• Write community string: "private"
• Console user account: No username
• Console user password: No password
4/12/00, 10:25 AM
109

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 470F - NetStructure Switch and is the answer not in the manual?

Table of Contents