Configure Device - Intel 470F - NetStructure Switch User Manual

C H A P T E
LOCATION
Main Menu

Configure Device

470T Ch5 - Sec 1-Nav & Config.p65
R 5 Using Local Management
Configure Device
Description
IP Settings: Configures the switch's IP address, subnet mask, and default
gateway, or enables BOOTP.
Port Settings: Enables and disables ports, configures port speed, duplex,
flow control, and priority.
Switch Settings: Sets switch identification, location, and contact
information, and configures some advanced switch settings.
Spanning Tree Protocol: Configures Spanning Tree for the entire switch
or individual ports.
Forwarding and Filtering: Adds or removes entries, locks the switch's
address table, enables IGMP snooping, and sets filters for specific MAC
addresses.
Port Mirroring: Sends a copy of data from one port to another for
monitoring and troubleshooting purposes.
Link Aggregation: Combines ports on the switch to increase bandwidth.
Broadcast Storm Control: Configures ports to drop excessive broadcast
traffic before it floods the network.
GBIC Port Settings (470T only): Enables and disables ports, configures
port speed, duplex, flow control, and priority.
49 4/12/00, 10:20 AM
49