Reset And Console Options - Intel 470F - NetStructure Switch User Manual

C H A P T E
LOCATION
Main Menu
Configure Management

Reset and Console Options

74
470T Ch5 - Sec 1-Nav & Config.p65
R 5 Intel® NetStructure™ 470T and 470F Switches User Guide
Reset and Console Options
Description
Reset Options
Reboot switch: Reboots the switch. If you changed the IP
configuration or login setting, the new settings take effect after you
select this option.
Reset switch settings to factory defaults: Clears any IP address or
current changes and resets the switch back to its factory defaults. All
counters are cleared and the switch starts sending BOOTP requests.
Serial Port Settings
Port Setting: Configures the switch's serial port for out-of-band (SLIP)
management. Press z to toggle the field from <Console> to
<SLIP>. Settings take effect on the next reboot.
Console Timeout: Logs out a user after a period of inactivity. Settings
are from 0-60 minutes in 15-minute increments. A setting of <Never>
means no timeout. The default is 60 minutes.
74 4/12/00, 10:23 AM