How To Manage User Accounts - Intel 470F - NetStructure Switch User Manual

C H A P T E
470T Ch5 - Sec 1-Nav & Config.p65
R 5 Using Local Management
Modify User Accounts
Access Level: Changes access rights for the user (press z).
Delete: Deletes an account (press z to change the value to
<Yes>). The default value is <No>.
APPLY CHANGES: Saves changes when modifying or deleting user
accounts.

How to Manage User Accounts

System Administrators can create up to three user accounts for managing
the switch. You can also change the access rights for current users and
delete user accounts. Make sure you always set up at least one
Administrator account.
To create a user account
1 From the Main Menu, select Configure Management and press
E . Under this menu, select Administer User Accounts and press
E .
2 On the User Accounts screen, type the name of the new user in the
Username field and press E .
3 Since this is a new user, press T to skip the Old password field
and go to the New password field.
4 Type the password for the new user and press E . Passwords are
case-sensitive and can be up to fifteen characters long.
5 To confirm the new password, retype it in the Confirm new password
field. Press E .
6 Select the access rights for the new user by pressing z .
7 To save the information, press T to select SAVE CHANGES
(below the Confirm new password field) and press E . The new
account appears in the list under Modify User Accounts.
71 4/12/00, 10:23 AM
71