Configuring The Switch's Ip Settings - Intel Express 530T User Manual

C H A P T E R
NOTE
Each stack of switches has one
IP address.
4 Using the Web Device Manager

Configuring the Switch's IP Settings

Note: You must select Manual in the IP Assignment Method box before
you can change the IP settings.
1 Click the Configure Stack menu and then click IP Settings. The IP
Settings screen appears on the right side of the Web Device Manager
window.
2 To manually configure the IP settings, select Manual in the IP
Assignment Method box. In the Change box, type the new IP
address, subnet mask, and default gateway. If you have set up tag-
based VLANs on the switch, you can specify the VID (VLAN ID) of
the VLAN where the switch's SNMP management agent will reside.
3 To apply the changes, click Submit.
4 Click Save and Reboot for the new settings to take effect. Rebooting
the switch temporarily interrupts network connectivity to the switch.
Click Reboot Later if you want to reboot the switch later. The new IP
settings do not take effect until the switch reboots.
33