Download Print this page

HP Z420 Installation Manual

Ieee-1394b pci express card installation
Hide thumbs

Advertisement

IEEE-1394b PCI Express Card
installation
Introduction
This document describes how to install an IEEE-1394b PCI Express (PCIe) card in HP Z series
workstations.

Kit contents

IEEE-1394b PCIe card
Low profile (small) and standard size PCIe card brackets
External 1394b cable
SATA power extension cable
1394b Unibrain drivers CD
Warranty information
Installation instructions

Before you begin

To view QuickSpecs and determine the compatibility of this product with your HP workstation, see
http://www.hp.com/go/productbulletin.
ENWW
© 2011 Hewlett-Packard Development Company, L.P.
Introduction
1

Advertisement

loading

  Related Manuals for HP Z420

  Summary of Contents for HP Z420

  • Page 1: Kit Contents

    SATA power extension cable ● 1394b Unibrain drivers CD ● Warranty information ● Installation instructions ● Before you begin To view QuickSpecs and determine the compatibility of this product with your HP workstation, see http://www.hp.com/go/productbulletin. © 2011 Hewlett-Packard Development Company, L.P. Introduction ENWW...
  • Page 2: Warnings And Cautions

    Warnings and cautions WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching. WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of an electrical shock hazard.
  • Page 3: Step 1-Preparing For Component Installation

    Step 1—Preparing for component installation NOTE: Workstation models vary. All illustrations are examples only. Download and install updates Check for available system BIOS updates specified for your HP workstation model and operating system at http://www.hp.com/go/workstationsupport. Install the system BIOS updates, if available. Accessing the internal components of the computer If you need help preparing the computer for this installation, consult the removal and replacement procedures in the service guide for your computer at http://www.hp.com/support/manuals.
  • Page 4: Step 3-Configuring The Cabling

    Step 2—Installing the IEEE-1394b card Small form factor (SFF) platforms such as the HP Z210 SFF Workstation require connection of the low profile bracket onto the 1394b card before installing the card into the PCIe expansion slot. The following illustration shows steps for detaching the standard bracket from the 1394b card and replacing it with the low profile (shorter) bracket.
  • Page 5: Step 4-Reassembling The Workstation

    Connect the other end (labeled P3) of the SATA power extension cable to the power connector on the IEEE-1394b card. Figure 3 Connecting the SATA power extension cable If the 1394 header is not present on the system board, plug the 1394 I/O cable located on the side of the workstation chassis into the 1394b card (1).
  • Page 6: Japanese 日本語

    Japanese 日本語 This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then select your workstation product and select Japanese from the drop down Manual Language menu. このドキュメントは日本語版が用意されています。http://www.hp.com/support/ にアクセスし、 ご使用のワークステーション製品を選択し、 Manual Language workstation_manuals ドロップダウン メニューから Japanese を選択してください。 IEEE-1394b PCI Express Card installation ENWW...

This manual is also suitable for:

Z820Z210 sffZ210 cmtZ400Z600Z800