Installing The Raid Battery - Dell PowerEdge R810 Owner's Manual

Figure 3-21. Removing or Installing the RAID Battery
1
1 RAID battery cable
3 battery carrier
5 slots (2)

Installing the RAID Battery

1 Insert the RAID battery into the battery carrier. See Figure 3-21.
2 Align the tabs on the battery carrier with the battery carrier slots on the
chassis.
3 Slide the battery carrier into the battery carrier slots until it locks into
place. See Figure 3-21.
4 If applicable, connect the battery cable to the connector on the storage
card.
5 Route the power/data cables along the chassis wall. See step 2 and step 3 of
"Sliding the Front-Chassis Assembly" on page 98.
6 Close the system. See "Closing the System" on page 85.
130
Installing System Components
2
3
4
5
2 RAID battery
4 tabs (2)