Installing The Lsi 9265-8I Raid Battery Assembly - Dell PowerEdge C6220 Hardware Owner's Manual
Hide thumbs
Also See for PowerEdge C6220:
- Hardware owner's manual (274 pages) ,
- Getting started (169 pages) ,
- Using instructions (68 pages)
Table of Contents
Advertisement
Figure 3-31. Removing and Installing the LSI 9265-8i RAID Battery Assembly
1
screws (2)
3
system-board assembly
Installing the LSI 9265-8i raid Battery Assembly
1
Attach the LSI9265-8i RAID battery assembly onto the system board.
See Figure 3-31.
2
Replace the screws securing the LSI9265-8i RAID battery assembly.
See Figure 3-31.
3
Connect the cable connecting to the LSI 9265-8i card.
4
When replacing the LSI9265-8i RAID battery assembly for 1U node,
skip to step 7; for 2U node, continue the steps.
5
Replace the interposer-extender tray. See "Removing the Interposer
Extender Tray" on page 153.
6
Replace the interposer extender for 2U node. See "Removing the
Interposer Extender for 2U Node" on page 151
7
Install the system-board assembly. See "Installing a System-Board
Assembly" on page 143.
2
LSI 9265-8i RAID battery assembly
Installing System Components | 181
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
