Fw-1430; Fw-1431; Fw-1432; Fw-1433 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

35

FW-1430

FW-1430
Message
<timestamp>, [FW-1430], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor <string>.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty temperature sensors is greater than or equal to the policy set by the switchStatusPolicySet
command. A temperature sensor is faulty when the sensor value is not in the acceptable range or
is faulty.
Recommended Replace the field-replaceable unit (FRU) with the faulty temperature sensor.
Action
Severity WARNING

FW-1431

Message
<timestamp>, [FW-1431], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Fan:
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty fans is greater than or equal to the policy set by the switchStatusPolicySet command. A fan is
faulty when sensor value is not in the acceptable range or is faulty.
Recommended Replace the faulty or deteriorating fan field-replaceable units (FRUs).
Action
Severity WARNING

FW-1432

Message
<timestamp>, [FW-1432], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor WWN:
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty world wide name (WWN) cards is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended Replace the faulty WWN card.
Action
Severity WARNING

FW-1433

Message
<timestamp>, [FW-1433], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor CP: CP non-redundant.
290
<Number Bad>
bad.
<Number Bad>
bad.
Fabric OS Message Reference
53-1001157-01