Fw-1193; Fw-1194; Fw-1195 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade fabric os message reference guide v6.2.0 (53-1001157-01, april 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
35
FW-1193
FW-1193
Message
<timestamp>, [FW-1193], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of state changes that the port experiences has fallen below the low
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
A low number of port state changes means that the switch is functioning normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1194
Message
<timestamp>, [FW-1194], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of state changes that the port experiences has risen above the high
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
WARNING
FW-1195
Message
<timestamp>, [FW-1195], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of state changes that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. The state of the port has
changed for one of the following reasons: the port has gone offline, has come online, is testing, is
faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
250
Fabric OS Message Reference
53-1001157-01
Advertisement
Chapters
Table of Contents
