Sec-1042; Sec-1043; Sec-1044; Sec-1045 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

Severity ERROR

SEC-1042

Message
<timestamp>, [SEC-1042], <sequence-number>,, ERROR, <system-name>, Invalid
index/area member <port member> in portlist (<Port list>). Out of range (<Minimum
value> - <Maximum value>).
Probable Cause Indicates the specified index or area member is not within the minimum and maximum range.
Recommended Use valid syntax when entering index or area numbers.
Action
Severity ERROR

SEC-1043

Message
<timestamp>, [SEC-1043], <sequence-number>,, ERROR, <system-name>, Invalid port
range <Minimum> - <Maximum>.
Probable Cause Indicates the specified port is not within the minimum and maximum range.
Recommended Use valid syntax when entering port ranges.
Action
Severity ERROR

SEC-1044

Message
<timestamp>, [SEC-1044], <sequence-number>,, ERROR, <system-name>, Duplicate
member <member ID> in (<List>).
Probable Cause Indicates the specified member is a duplicate in the input list. The list can be a policy list or a
switch member list.
Recommended Do not specify any duplicates.
Action
Severity ERROR

SEC-1045

Message
<timestamp>, [SEC-1045], <sequence-number>,, ERROR, <system-name>, Too many port
members.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Fabric OS Message Reference
53-1001157-01
75
SEC-1042
417