75
SEC-1022
Recommended
Check for unauthorized access to the switch through the SSH connection.
Action
Severity
INFO
SEC-1022
Message
<timestamp>, [SEC-1022], <sequence-number>,, WARNING, <system-name>, Failed to
<operation>
Probable Cause
Indicates the fabric failed to generate or validate either the public or private key pair or the
certificate signing request (CSR).
Recommended
Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
Action
switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the
Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the
certificate by following the field upgrade process.
Severity
WARNING
SEC-1024
Message
<timestamp>, [SEC-1024], <sequence-number>,, INFO, <system-name>, The
security database is too large to fit in flash.
Probable Cause
Indicates the size of the security database is too large for the flash memory. The size of the security
database increases with the number of entries in each policy.
Recommended
Reduce the size of the security database by reducing the number of entries within each policy.
Action
Severity
INFO
SEC-1025
Message
<timestamp>, [SEC-1025], <sequence-number>,, ERROR, <system-name>, Invalid IP
address
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can occur only
when the primary fabric configuration server (FCS) distributes the security database to the other
switches in the fabric, then local validation finds the error in the security database. This is a rare
occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity
ERROR
412
PKI objects.
(<IP address>)
detected.
<DB name>
Fabric OS Message Reference
53-1001157-01