Hamk-1004 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

Brocade fabric os message reference guide v6.2.0 (53-1001157-01, april 2009)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

HAMK-1004

<timestamp>,[HAMK-1004], <sequence-number>,, INFO, <system-name>, Resetting

standby CP (double reset may occur).

Probable Cause

Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This

message is typically seen when the standby CP has been rebooted. Note that in certain

circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover

automatically even if it has rebooted twice.

No action is required.

Fabric OS Message Reference

53-1001157-01

Table of Contents