Bl-1020; Bl-1021; Bl-1022 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

5

BL-1020

BL-1020
Message
<timestamp>, [BL-1020], <sequence-number>,, CRITICAL, <system-name>, Switch timed
out initializing the chips.
Probable Cause Indicates that the switch has failed to initialize the application-specific integrated circuit (ASIC)
chips.
Recommended Reboot or power cycle the switch.
Action
Run the systemVerification command to verify that the switch does not have hardware problems.
Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric
OS Command Reference for more information on these commands.
If the message persists, replace the switch.
Severity CRITICAL

BL-1021

Message
<timestamp>, [BL-1021], <sequence-number>,, INFO, <system-name>, Retry <Retry
Number>, internal port retry initialization, <List of internal ports retrying
initialization>.
Probable Cause Indicates that the switch had internal ports not online and that the system is retrying to bring the
ports that failed back online.
Recommended No action is required.
Action
Severity INFO

BL-1022

Message
<timestamp>, [BL-1022], <sequence-number>,, CRITICAL, <system-name>, Init Failed:
Switch DISABLED because internal ports were not ONLINE,
number not ONLINE>.
Probable Cause Indicates that the switch initiation failed because one or more of the internal ports was not online.
The switch is faulted.
Recommended Reboot or power cycle the switch.
Action
Run the systemVerification command to verify that the switch does not have hardware problems.
Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric
OS Command Reference for more information on these commands.
Additional fault messages precede and follow this error, providing more information. See other
error messages for recommended action.
If the message persists, replace the switch.
Severity CRITICAL
56
<list of internal port
Fabric OS Message Reference
53-1001157-01