Trce-1004; Trce-1005; Trce-1006 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

85

TRCE-1004

Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action supportSave command and contact your switch service provider.
Severity ERROR
TRCE-1004
Message
<timestamp>, [TRCE-1004], <sequence-number>,, WARNING, <system-name>, Trace dump
optional slot indicating on which slot the dump occurs >
transferred because trace auto-FTP disabled.
Probable Cause Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action and contact your switch service provider.
Severity WARNING

TRCE-1005

Message
<timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>, FTP
Connectivity Test failed due to error.
Probable Cause Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong
FTP address, an FTP site down, or the network being down.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action and contact your switch service provider.
Severity ERROR

TRCE-1006

Message
<timestamp>, [TRCE-1006], <sequence-number>,, INFO, <system-name>, FTP
Connectivity Test succeeded to FTP site '
'.
Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the
supportFtp -t command.
Recommended No action is required.
Action
Severity INFO
512
<FTP target configured by users.>
Fabric OS Message Reference
<
was not
53-1001157-01