Rpcd-1004; Rpcd-1005; Rpcd-1006; Rpcd-1007 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

71

RPCD-1004

RPCD-1004
Message
<timestamp>, [RPCD-1004], <sequence-number>,, WARNING, <system-name>, Invalid
certificate file. Secure RPCd is disabled.
Probable Cause Indicates the SSL certificate file has been corrupted.
Recommended To enable RPCD in Secure mode, install a valid SSL certificate the switch.
Action
Severity WARNING

RPCD-1005

Message
<timestamp>, [RPCD-1005], <sequence-number>,, WARNING, <system-name>, Missing
private key file. Secure RPCd is disabled.
Probable Cause Indicates the private key file is missing.
Recommended Run the pkiCreate command to install a valid private key file.
Action
Severity WARNING

RPCD-1006

Message
<timestamp>, [RPCD-1006], <sequence-number>,, WARNING, <system-name>, Permission
denied accessing private key file. Secure RPCd is disabled.
Probable Cause Indicates the private key file configured on the switch could not be accessed because the root did
not have read-level access.
Recommended Change the file system access level for the private key file and make sure that root has read-level
Action access.
Severity WARNING

RPCD-1007

Message
<timestamp>, [RPCD-1007], <sequence-number>,, WARNING, <system-name>, Invalid
private file. Secure RPCd is disabled.
Probable Cause Indicates the private key file has been corrupted.
Recommended Run the pkiCreate command to install a valid private key file.
Action
Severity WARNING
402 Fabric OS Message Reference
53-1001157-01