Fabr-1030; Fabr-1031; Fabr-1032 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

•
•
•
Recommended No action is required.
Action
Severity INFO

FABR-1030

Message
<timestamp>, [FABR-1030], <sequence-number>,, INFO, <system-name>, fabric: Domain
<new domain ID> (was <old domain ID>).
Probable Cause Indicates that the domain ID has changed as specified.
Recommended No action is required.
Action
Severity INFO

FABR-1031

Message
<timestamp>, [FABR-1031], <sequence-number>, FFDC, WARNING, <system-name>,
Maximum number of retries sending ILS from port
Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service (ILS) to
the iswitchd demon on the specified E_Port.
Recommended Run the top command to see if iswitchd is extremely busy or if another process is using excessive
Action CPU resources.
Severity WARNING

FABR-1032

Message
<timestamp>, [FABR-1032], <sequence-number>, WARNING, <system-name>, Remote
switch with domain ID <domain ID>and switchname <switchname>running an unsupported
FOS version v2.x has joined the fabric.
Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric.
Recommended Remove the switch with the unsupported Fabric OS version 2.x from the fabric.
Action
Fabric OS Message Reference
53-1001157-01
VC_RDY mode: Virtual-channel flow control mode. This is a proprietary protocol.
R_RDY mode: Receiver-ready flow control mode. This is the Fibre Channel standard protocol,
that uses R_RDY primitive for flow control.
DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer
credits are fixed, based on the port configuration information. In this mode, the buffer credits
are negotiated as part of exchange link parameter (ELP) exchange. This mode also uses the
R_RDY primitive for flow control.
FABR-1030
<port number>
exceeded.
20
135