Sec-1090; Sec-1091; Sec-1092; Sec-1093 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

75

SEC-1090

SEC-1090
Message
<timestamp>, [SEC-1090], <sequence-number>,, ERROR, <system-name>, SCC list
contains FCS member. Please remove member from the FCS policy first.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR

SEC-1091

Message
<timestamp>, [SEC-1091], <sequence-number>,, ERROR, <system-name>, No policy to
remove.
Probable Cause Indicates the specified policy member does not exist or the policy itself does not exist.
Recommended Verify that the security policy name or member ID is correct.
Action
Severity ERROR

SEC-1092

Message
<timestamp>, [SEC-1092], <sequence-number>,, ERROR, <system-name>, <Policy name>
Name not found.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR

SEC-1093

Message
<timestamp>, [SEC-1093], <sequence-number>,, ERROR, <system-name>, New FCS list
must have at least one member in common with current FCS list.
428 Fabric OS Message Reference
53-1001157-01