Fw-1176; Fw-1177; Fw-1178; Fw-1179 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade fabric os message reference guide v6.2.0 (53-1001157-01, april 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
FW-1176
Message
<timestamp>, [FW-1176], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause
Indicates that the number of invalid words that the port experiences has changed. Invalid words
usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable.
Recommended
Check both ends of your connections, your SFP, and your cable to verify that none are faulty.
Action
Severity
INFO
FW-1177
Message
<timestamp>, [FW-1177], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of invalid words that the port experiences has fallen below the low
boundary. Invalid words usually indicate a hardware problem with an small form-factor pluggable
(SFP) or cable. A low number of invalid words means that the switch is functioning normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1178
Message
<timestamp>, [FW-1178], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of invalid words that the port experiences has risen above the high
boundary. Invalid words usually indicate a hardware problem with an small form-factor pluggable
(SFP) or cable.
Recommended
Check both ends of your connections, your SFP, and your cable to verify that none are faulty.
Action
Severity
WARNING
FW-1179
Message
<timestamp>, [FW-1179], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Fabric OS Message Reference
53-1001157-01
35
FW-1176
245
Advertisement
Chapters
Table of Contents
