Auth-3001; Auth-3002; Auth-3003; Audit Auth System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

AUDIT AUTH System Messages

AUTH-3001

Message
AUDIT, <timestamp>, [AUTH-3001], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Data type> type
has been changed from [<Old value>] to [<New value>].
Probable Cause Indicates that an authentication configuration value was set to a specified value. The data type is
"authentication type", "DH group type", "Hash type", or "policy type".
Recommended No action is required.
Action
Severity INFO

AUTH-3002

Message
AUDIT, <timestamp>, [AUTH-3002], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Event Related
Info>.
Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret
command.
Recommended No action is required.
Action
Severity INFO

AUTH-3003

Message
AUDIT, <timestamp>, [AUTH-3003], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Operation type>
the PKI objects.
Probable Cause Indicates that the public key infrastructure (PKI) objects were created using the pkiCreate
command or that the PKI objects were removed using the pkiRemove command. The Operation
Type can be either "Created" or "Removed".
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1001157-01
Chapter
90
547