Fw-1173; Fw-1174; Fw-1175 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade fabric os message reference guide v6.2.0 (53-1001157-01, april 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
35
FW-1173
Severity
INFO
FW-1173
Message
<timestamp>, [FW-1173], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of protocol errors that the port experiences has fallen below the low
boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors
occur due to hardware problems. A low number of protocol errors means that the switch is
functioning normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1174
Message
<timestamp>, [FW-1174], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of protocol errors that the port experiences has risen above the high
boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors
occur due to hardware problems.
Recommended
Check both ends of your connection. Verify that your cable and small form-factor pluggable (SFP)
Action
are not faulty.
Severity
WARNING
FW-1175
Message
<timestamp>, [FW-1175], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of protocol errors that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. Occasional protocol errors
occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
244
Fabric OS Message Reference
53-1001157-01
Advertisement
Chapters
Table of Contents
