Fabs-1008; Fabs-1009; Fabs-1010; Fabs-1011 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

Severity WARNING

FABS-1008

Message
<timestamp>, [FABS-1008], <sequence-number>,, WARNING, <system-name>,
name>
Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended Reboot or power cycle the switch.
Action
Severity WARNING

FABS-1009

Message
<timestamp>, [FABS-1009], <sequence-number>,, WARNING, <system-name>,
name>
Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended Reboot or power cycle the switch.
Action
Severity WARNING

FABS-1010

Message
<timestamp>, [FABS-1010], <sequence-number>,, WARNING, <system-name>, <Function
name>: Wrong media_event <Event number>
Probable Cause Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended Reboot or power cycle the switch.
Action
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING

FABS-1011

Message
<timestamp>, [FABS-1011], <sequence-number>,, ERROR, <system-name>, <Method
name>[<Method tag number>]:Invalid input state 0x<Input state code>
Probable Cause Indicates an unrecognized state code was used in an internal Fabric OS message for a FRU.
Fabric OS Message Reference
53-1001157-01
: Media oid mapping failed
: type is not media
21
FABS-1008
<Function
<Function
143