Sec-1064; Sec-1065; Sec-1069; Sec-1071 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

75

SEC-1064

Severity ERROR
SEC-1064
Message
<timestamp>, [SEC-1064], <sequence-number>,, ERROR, <system-name>, Failed to sign
message.
Probable Cause Indicates the public key infrastructure (PKI) objects on the switch are not in a valid state and the
signature operation failed.
Recommended Run the pkiShow command to verify that all PKI objects are valid. If PKI objects are not valid,
Action generate the PKI objects and install the certificate by following the field upgrade process.
Severity ERROR

SEC-1065

Message
<timestamp>, [SEC-1065], <sequence-number>,, ERROR, <system-name>, Invalid
character in list.
Probable Cause Indicates the input list has an invalid character.
Recommended Enter valid input.
Action
Severity ERROR

SEC-1069

Message
<timestamp>, [SEC-1069], <sequence-number>,, ERROR, <system-name>, Security
Database is corrupted.
Probable Cause Indicates the security database is corrupted for unknown reasons.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action and contact your switch service provider.
Severity ERROR

SEC-1071

Message
<timestamp>, [SEC-1071], <sequence-number>,, ERROR, <system-name>, No new
security policy data to apply.
Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended Verify that the security event was planned. First change some policy definitions, then run the
Action secPolicyActivate command to activate the policies.
422 Fabric OS Message Reference
53-1001157-01