Fw-1007; Fw-1008; Fw-1009; Fw-1010 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

FW-1007

Message
<timestamp>, [FW-1007], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the speed of the fan has risen above the high boundary. Fan problems typically
contribute to temperature problems.
Recommended Consistently abnormal fan speeds generally indicate that the fan is failing. Replace the fan
Action field-replaceable unit (FRU).
Severity WARNING

FW-1008

Message
<timestamp>, [FW-1008], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the speed of the fan has changed from a value outside of the acceptable range to a
value within the acceptable range. Fan problems typically contribute to temperature problems.
Recommended No action is required. Consistently abnormal fan speeds generally indicate that the fan is failing. If
Action this message occurs repeatedly, replace the fan field-replaceable unit (FRU).
Severity INFO

FW-1009

Message
<timestamp>, [FW-1009], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the state of the power supply has changed from faulty to functional, or from
functional to faulty.
Recommended If the power supply is functioning correctly, no action is required.
Action
If the power supply is functioning below the acceptable boundary, verify that it is seated correctly in
the chassis. Run the psShow command to view the status of the power supply. If the power supply
continues to be a problem, replace the faulty power supply.
Severity INFO

FW-1010

Message
<timestamp>, [FW-1010], <sequence-number>,, WARNING, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the power supply is faulty. The power supply is not producing enough power.
Fabric OS Message Reference
53-1001157-01
35
FW-1007
223