Sec-1001; Sec-1002; Sec System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

SEC System Messages

SEC-1001

Message
<timestamp>, [SEC-1001], <sequence-number>,, ERROR, <system-name>, RCS process
fails:
Probable Cause Indicates that the reliable commit service (RCS) process failed to complete. RCS is a mechanism
for transferring data from one switch to other switches within the fabric. RCS ensures that either all
or none of the switches commit to the database. RCS can fail if one switch in the fabric is busy or in
an error state that prevents it from accepting the database.
Recommended The RCS process is evoked when the security database is modified by a security command (for
Action example, secPolicySave, secPolicyActivate, or secVersionReset). If the switch is busy, the
command might fail the first time. Retry the command.
Run the rcsInfoShow command to view RCS capability on the fabric. RCS must be capable on all
switches in the fabric to be enabled. If all switches are capable, RCS is automatically enabled.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR

SEC-1002

Message
<timestamp>, [SEC-1002], <sequence-number>,, ERROR, <system-name>, Security data
fails:
Probable Cause Indicates that the receiving switch fails to validate the security database sent from the primary
fabric configuration server (FCS) switch. This might be caused by several factors: the data package
may be corrupted, the time stamp on the package may be out of range as a result of replay attack
or out-of-sync time service, or the signature verification failed. Signature verification failure may
result from an internal error, such as losing the primary public key or an invalid database.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in Ready state. If a switch is in the error state, the database might not be correctly updated for
that switch. The error might also be a result of an internal corruption or a hacker attack to the
secure fabric. If you have reason to believe that the error is the result of a possible security breach,
take appropriate action as defined by your enterprise security policy.
Severity ERROR
Fabric OS Message Reference
53-1001157-01
<reason code>
<Reason Text>.
Chapter
75
409