Ficn-1019; Ficn-1020; Ficn-1021; Ficn-1022 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

28

FICN-1019

FICN-1019
Message
<timestamp>, [FICN-1019], <sequence-number>,, ERROR, <system-name>, DevTapeEgr:AS
Link Level Reject (LRJ) from Chan on Path=<FICON PATH> LastCmd=0x<the Last 4
commands issued to the device> LastStatus=0x<the Last 4 status values received
from the device>.
Probable Cause Indicates the FICON channel indicated in the path issued an LRJ frame for a sequence from the
device.
Recommended If there was a job failure associated with this event, contact your vendor's customer support for
Action assistance.
Severity ERROR

FICN-1020

Message
<timestamp>, [FICN-1020], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Cancel received Path=<FICON PATH> state=0x<the current emulation
state for the device> tflags=0x<the current emulation tape control flags for the
device> sflags=0x<the current emulation status control flags for the device>.
Probable Cause Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer
Action support for assistance.
Severity ERROR

FICN-1021

Message
<timestamp>, [FICN-1021], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Tape Cancel:Path=<FICON PATH> Elapsed Time=<the current SIO time
in seconds for the device>.<the current SIO time in milliseconds for the device>
seconds.
Probable Cause Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer
Action support for assistance.
Severity ERROR

FICN-1022

Message
<timestamp>, [FICN-1022], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Selective Reset:Path=<FICON PATH> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tape control flags for the device>
sflags=0x<the current emulation status control flags for the device>.
186 Fabric OS Message Reference
53-1001157-01