Diagclearerror - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

diagClearError

Clears the diagnostics failure status.
Synopsis diagclearerror [[--slot] slotnumber] -all
Description Use this command to clear the diagnostics failure status.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
--slot slotnumber
-all
If no operand is specified, the default is to clear all bad port flags.
Examples To clear the diag software flag:
See Also none
Fabric OS Command Reference
53-1000599-01
Specify the slot to clear the diagnostics failure status. The default is set to 0
and designed to operate on fixed-port-count products.
If specified, all blades clear
switch:admin> diagclearerror 8
ERROR: DIAG CLEARERR
Diagnostics Errors Cleared, port: 8/31
Err# 0120041 081F
diagClearError
.
2
99