Fazonedelete - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

fazoneDelete

Deletes a Fabric Assist mode (FA) zone.
Synopsis fazonedelete "fazonename"
Description Use this command to delete an existing Fabric Assist mode zone on a fabric.
This command does not change the defined configuration (which you can view using the cfgShow
command). For the change to become effective, it must be enabled using the cfgEnable command.
For the change to be preserved across switch reboots, it must be saved to nonvolatile memory
using the cfgSave command.
When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operands:
fazonename
Examples To delete a Fabric Assist zone:
See Also fazoneAdd, fazoneCreate, fazoneRemove, fazoneShow
Fabric OS Command Reference
53-1000599-01
Specify the name of the zone to be deleted, in quotation marks. This operand
is required.
switch:admin> fazonedelete "Blue_fazone"
2
fazoneDelete
153