Secglobalshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

secGlobalShow

secGlobalShow
Displays the current internal security state information.
Synopsis secglobalshow
Description Use this command to display security server (secd) specific information as a snapshot of its current
state. The output may include information about the following:
•
•
•
•
•
This command is intended primarily for debugging purposes by technical support staff. The
information displayed may not be supported between releases and is subject to change without
notice.
Operands none
Examples To view the current security state:
548
General security parameters
The latest zone transaction
The current status of the RCS transaction
The state of the Domain
wwnDL state
switch:admin> secglobalshow
----General Security Information----
flag 1, saveflag 0
transId 0
Queue Size 0
final Rca 0
reliablemsg 0
reliablePhase 0
Primary pub key: Empty
Primary Version 0
Primary WWN 10:00:00:05:1e:01:23:e0 (local switch)
Stamp 0
----The latest zone transaction--
last retVal from zone: not used
last zone size when calling zone: not used
----The latest RCS STATUS----
RCS was enabled
sec_aca: free
RCS latest Phase: Completion
RCS Message ==> RCS transaction completes.
----DataBase STATUS----
Retry Role 0
Retry Qeury0
Security Active DataSize 35 bytes
-----Domain State-----
Active Sum 215b
Security Defined DataSize 35 bytes
Define Sum 215b
Zone Size (include enabled configuration) 312 bytes
Zone sum e04b215b
sec_db: free
Fabric OS Command Reference
53-1000599-01