Porterrshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

portErrShow

portErrShow
Displays port error summary.
Synopsis porterrshow
Description Use this command to display an error summary for all ports. The display contains one output line
per port and shows error counters in ones, thousands (k), or millions (m).
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display error counters for ports on a switch:
See Also portShow, portStatsShow
474
frames tx Frames transmitted
frames rx Frames received
enc in Encoding errors inside frames
crc err Frames with CRC errors
too shrt Frames shorter than minimum
too long Frames longer than maximum
bad eof Frames with bad end-of-frame delimiters
enc out Encoding error outside of frames
disc c3 Class 3 frames discarded
link fail Link failures (LF1 or LF2 states)
loss sync Loss of synchronization
loss sig Loss of signal
frjt Frames rejected with F_RJT
fbsy Frames busied with F_BSY
switch:admin> porterrshow
frames enc
tx rx in
=====================================================================
0: 0 0 0
1: 0 0 0
2: 0 0 0
3: 12 14 0
4: 300 300 0
5: 0 0 0
6: 12 14 0
7: 0 0 0
29: 0 0 -
30: 0 0 -
31: 0 0 -
(output truncated)
crc too too bad enc disc link loss loss frjt fbsy
err shrt long eof
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
out c3 fail sync sig
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 3
2 0 1 1
0 0 0 0
0 0 0 3
0 0 0 0
- 0 - -
- 0 - -
- 0 - -
Fabric OS Command Reference
2 0 0
1 0 0
1 0 0
6 0 0
2 0 0
2 0 0
6 0 0
2 0 0
- - -
- - -
- - -
53-1000599-01