Supportffdc - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

supportFfdc

Modifies or displays first-fault data capture (FFDC) daemon.
Synopsis supportffdc [--disable | --enable | --show]
Description Use this command to disable or enable the FFDC events, or display the current configuration. If
disabled, the daemon does not capture any data even when a message with FFDC attributes is
logged. FFDC is enabled by default.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
--disable
--enable
--show
When executed without operands, the command prints the usage.
Examples To display the FFDC configuration:
To enable the FFDC events:
See Also none
Fabric OS Command Reference
53-1000599-01
Disables the FFDC.
Enables the FFDC.
Displays the FFDC configuration parameters.
switch:admin> supportffdc --show
First Failure Data Capture (FFDC) is disabled.
switch:admin> supportffdc --enable
First Failure Data Capture (FFDC) is enabled.
2
supportFfdc
603