Fanshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual
Brocade fabric os command reference guide v6.0.0 (53-1000599-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
2
fanShow
fanShow
Displays fan status and speed.
Synopsis
fanshow
Description
Use this command to display the current status and speed of each fan in the system.
Fan status is displayed as:
OK
absent
below minimum
above minimum
unknown
faulty
The output from this command varies depending on switch type and number of fans present.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands
none
Examples
To display information on the fans in the system:
See Also
chassisShow, fanDisable, fanEnable, psShow
146
Fan is functioning correctly.
Fan is not present.
Fan is present but rotating too slowly or stopped.
Fan is rotating too quickly.
Unknown fan unit installed.
Fan has exceeded hardware tolerance and has stopped. In this case, the last
known fan speed is displayed.
switch:admin> fanshow
Fan #1 is OK, speed is 2721 RPM
Fan #2 is OK, speed is 2657 RPM
Fan #3 is OK, speed is 2700 RPM
Fabric OS Command Reference
53-1000599-01
Advertisement
Table of Contents
