Portcfgtrunkport - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portCfgTrunkPort

Configures a port to enable or disable trunking.
Synopsis portcfgtrunkport [slotnumber/]portnumber[,] mode
Description Use this command to enable or disable a port for trunking.
You can disable or enable trunking using the portCfgTrunkPort or switchCfgTrunk commands.
When the command is executed to update the trunking configuration, the ports for which the
configuration applies are disabled and reenabled with the new trunk configuration. As a result, the
traffic through these ports might be disrupted for a period of time.
Notes This command requires a Brocade ISL Trunking license.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber
portnumber
mode
Examples To enable a port for trunking:
See Also portCfgShow, portShow, switchCfgTrunk, switchShow
Fabric OS Command Reference
53-1000599-01
For bladed systems only, specify the slot number of the port to be configured,
followed by a slash (/).
Specify a port number to be configured, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
Specify 1 to enable this port for trunking. Specify 0 to disable the port from
being trunked. This operand is required.
switch:admin> portcfgtrunkport 1/3, 1
2
portCfgTrunkPort
463