Portenable - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portEnable

Enables a port.
Synopsis portenable [slotnumber/]portnumber
Description Use this command to enable a port. If the port is connected to another switch, the fabric might
reconfigure. Devices connected to the port can now communicate with the fabric.
For ports that come online after being enabled, the following indications might be sent to indicate a
state transition: RSCN, SNMP trap, Web pop-up window.
This command is rejected if the port's switch is disabled, the port's blade is not fully enabled
(faulted, powered off, or disabled), or if the port itself is persistently disabled.
Notes The front panel LED of an enabled and online port is green.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
slotnumber
portnumber
Examples To enable a port:
See Also portCfgPersistentDisable, portCfgPersistentEnable, portDisable, portShow, switchShow
Fabric OS Command Reference
53-1000599-01
For bladed systems only, specify the slot number of the port to be enabled,
followed by a slash (/).
Specify a port number to be enabled, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
switch:admin> portenable 2/4
2
portEnable
473