Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 580

2
secPolicyAdd
Examples To add a member to the SCC_POLICY using the device WWN:
To add two devices to attach to domain 3, ports 1 and 3, in an existing empty DCC policy; port WWN
of the first device is 11:22:33:44:55:66:77:aa and port WWN of the second device is
11:22:33:44:55:66:77:bb:
See Also distribute, fddCfg, secPolicyAbort, secPolicyActivate, secPolicyDelete,
secPolicyDump, secPolicyRemove, secPolicySave
554
These policy types require members be specified as WWN strings, domain
IDs, or switch names. If domain ID, or switch names are used, the switches
associated must be present in the fabric or the command fails.
DCC_POLICY Members
The DCC_POLICY_nnn is a list of devices associated with a specific switch
and port combination. An empty DCC_POLICY does not stop access to the
switch. The device is specified with a WWN string. The switch and port
combination must be in the following format:
switch port
switch can be specified using WWN, domain, or switch name.
port can be specified by port numbers separated by commas and enclosed in
either brackets or parenthesis; for example, (2, 4, 6). Ports enclosed in
brackets will include the devices currently attached to those ports.
The following examples illustrate several ways to specify the port values:
(1-6)
(*)
[3, 9]
[1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those
[*]
primaryfcs:admin> secpolicyadd "SCC_POLICY", "12:24:45:10:0a:67:00:40"
Member(s) have been added to SCC_POLICY.
primaryfcs:admin> secpolicyadd "DCC_POLICY_abc",
"11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3(1,3)"
Member(s) have been added to DCC_POLICY_abc.
Selects ports 1 through 6.
Selects all ports on the switch.
Selects ports 3 and 9 and all devices attached to those ports.
ports.
Selects all ports on the switch and devices currently attached to
those ports.
Fabric OS Command Reference
53-1000599-01