Userrename - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

userRename

userRename
Renames the user login name.
Synopsis userrename old_username new_username
Description Use this command to change an existing account login name to a new login name. The following
rules apply:
•
•
•
•
•
This command is not supported on all platforms.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands The following operands are required:
old_username
new_username
These operands are case sensitive.
Examples To rename the admin-level login name from "USERID" to "admin":
See Also None
676
new_username must begin with a letter and contain only alphanumeric characters or
underscores.
new_username must be between 1 and 40 characters long.
new_username must be different from any existing account login name.
If old_username is a default login name, new_username cannot be another default login
name.
If new_username is a default login name, it must indicate the same role as old_username.
The current user login name
The new user login name
switch:admin> userrename USERID admin
Fabric OS Command Reference
53-1000599-01